Land Pride Spreader FPS48 User Manual

Food Plot Seeder

Specifications & Capacities

Food Plot Seeder

FPS48

Description

Specification

Hitch Type Pull type with optional 2" ball hitch or clevis hitch

Base Unit Weight 370 lbs.

Base Unit Weight with 510 lbs.

Spin Spreader and Packer

Disc Cutting Width 40" to 50"

Minimum ATV Size 350 cc

Minimum Tractor/vehicle Size 17 hp

Height 52"

Length 104"

Width 54"

Weight Load on Each Disc 46 lbs.

Number of Disc Blades

Disc Blade Size & Type 16" Notched

Blade Spacing 7 1/2"

Transport / Gauging Tires 13" Diameter 4 ply tubeless

Bearing Hanger 3/8" Plate

Bearing Type, 2 per Gang Self Aligning, Sealed Bearing

Gang Tube 3" x 2"

Gang Axle 1" Square high carbon steel

Disc Angle Front Gang: 0, 7, 14 & 21 degrees

Rear Gang: 0, 7, 14 & 21 degrees

Frame Construction 2" x 2" Square tubular design

Lifting Device Ratchet Jack or Linear Actuator, 12 volt

Rear Axle pivot Type Greasable

Rear Roller Bearing Greasable

Optional Spin Spreader and Packer

Packer Roller Width 40 7/16"

Spreading Device Spin Spreader, 12V

Spreader Hopper Loading Height 42" off ground

Spin Spreader Volume/Capacity 2 cu. ft. (15 gallons) (100 lbs. Maximum capacity weight)

Spin Spreader Deflector Diverts seed to smaller spreading width. Seed rate charts calculated at 48"

Small Seed Restrictor Restricts small seed for smaller distribution levels.

Designs, speciﬁcations, features and information are subject to change without notice.

1/19/06

322-118S